420 Stainless Steel Tube
-
Payment
-
Origin
China Mainland
-
Minimum Order
5
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
General Properties
420 Stainless steel tube is a grade of stainless steel produced by ASTM A276-2006 Stainless steel bar and profile.
420 is equivalent to China's 3CR13 stainless steel pipe, containing chromium weight percentage 12-14%, with a minimum carbon value of 0.15%, the typical value is 0.31%.
Characteristics and uses
Because the carbon content of about 0.31%, so more than 2cr13 (carbon content of about 0.2%) after quenching the hardness is high, as a knife blade, nozzle. Valve seat, valve, etc. But because the corrosion-resistant element ni content is only below 0.75%, the corrosion resistance ability is limited therefore 420 will rust
Chemical Composition(%)
C < 0.15
Mn < 1.00
Si < 1.00
P < 0.04
S < 0.03
Cr: 12.0~14.0
Advantages
Corrosion Resistance
Less resistant than the austenitic grades and the 17% chromium ferritic alloys
Good resistance in the hardened condition to the atmosphere, foods, fresh water, and mild acids
Resistance lowered in the annealed condition
Best with a smooth surface finish
Heat Resistance
Not recommended for use above the relevant tempering temperature because of reduction in mechanical properties
Scaling temperature is approximately 1202oF (650oC)
Machinability
Tough, stringy chip build-up.
Similar to machining some of the high carbon tool steel
Recommendations
- 304 Stainless Steel Tube 5 Pieces / (Min. Order)
- 304 Tube 5 Pieces / (Min. Order)
- Large Diameter Stainless Steel Tube 5 Pieces / (Min. Order)
- 304L Stainless Steel Tube 5 Pieces / (Min. Order)